The CAM-5 aggregates system sensor data and performs analytics providing operators real-time condition-based monitoring of critical electrical power assets. System sensors include wireless temperature sensors, partial discharge sensors, and humidity and ambient temperature sensors. The CAM-5 acts as a historian and as the primary interface point for SCADA integration or other head-end systems by leveraging common communication protocol support including DNP3, Modbus, 61850 and TCP/IP.
IntelliSAW™ IS CAM-5 - Continuous Asset Monitoring HMI
5" Touchscreen Interface
RS-485, Fiber and Ethernet available
Modbus, DNP3, IEC 61850, and TCP/IP
IntelliSAW Wireless Temperature Sensors, iNFC™ Temperature Sensors, IntelliSAW LPxx Temperature Sensors, IntelliSAW IRM Reader, IntelliSAW Humidity and Ambient Temperature Sensor,IntelliSAW Partial Discharge Air Interface,IntelliSAW Air Interface.
5” touch panel HMI for immediate on-site access to asset health information, trending, alarms, and configuration.
Aggregates sensor data from up to 120 temperature sensors, 80 PD UHF inputs and 80 humidity and ambient temperature sensors.
Serves as data historian capturing sensor data at a configurable interval and making this data available for detailed analysis.
Provides long term, short term and delta data trending for analytics on all sensor types
Protocol support for head-end integration including DNP3, IEC 61850, Modbus, and TCP/IP.
Available in multiple output communication interfaces; RS-485, Ethernet or Fiber.
Six configurable alarm outputs enable physical alarms on-site based on configurable parameters of raw data or analytics. Alarms can be integrated into 3rd party SCADA systems.
Supports Email and SMS notification based on all alarmable parameters.